Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: 'Top-Jet' Rocket motors for Model Aeroplanes

'Top-Jet' Rocket motors for Model Aeroplanes 5 years 1 week ago #809

  • rogersimmonds
  • rogersimmonds's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
  • Posts: 562
  • Karma: 8
  • Thank you received: 140
Hi guys,

is there anyone out there who knows anything about the 'Top-Jet' motors? By all accounts they are very similar to Rapier motors and, similarly, made in the Czech Republic.

I've had a query asking about them, and I had to confess I had not heard of them :blush:
The motors my colleague had come across were nicely engineered and a bit larger than Rapier L-2 motors, more in L-3 territory with similar performance, i.e. a steady 400 mN for 18 sec. Below are two data sheets:





Note there is a range of motors - fall of them very desirable:


There appear to be equivalents to the Rapier L-1 (80 mN) Rapier L-2 (120-200 mN) and L-3.

This is the only info I have - I don't know if they are still made, or whether they were ever available 'over the counter'.

So, if anybody knows anything at all about these motors, please tell me!:cheer:
Attachments:

Please Log in or Create an account to join the conversation.

Last Edit: by rogersimmonds.

'Top-Jet' Rocket motors for Model Aeroplanes 4 years 1 month ago #863

  • TerryKidd
  • TerryKidd's Avatar
  • Visitor
  • Visitor
So these are from Svinčany, 535 01, Czech, which is less than ten miles from Pardubice. I wonder if these are somehow connected to our friend Dr Z?

Please Log in or Create an account to join the conversation.

'Top-Jet' Rocket motors for Model Aeroplanes 4 years 1 month ago #868

  • rogersimmonds
  • rogersimmonds's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
  • Posts: 562
  • Karma: 8
  • Thank you received: 140
Hi Terry,

if you can find out anything about these motors I would be most interested ....

Roger

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.075 seconds
Powered by Kunena Forum